- 177 Y, Frist Floor, PECHS, Block 2, Karachi.
- support.mes@morgan.com.pk
- +92 2134128801
Menu
LKT series is counter-flow round cooling tower.air travels upward through the fill or tube bundles, opposite to the downward motion of the water.
Could meet different area environment over the world,solved the problem of cold-effect instability caused by the change of one factor.Ensure the equipment normal operation,and save energy.
Frame: thick steel frame structure design. stable and strong rigidity; The load is evenly distributed on every part,operate steadily.AII structural parts are handled by hot dip galvanizing, and have great performance of rust resistance and corrosion resistance.
Fiberglass reinforced polyester(F.R.P):Use high quality rubber .unsaturated polyester resin and glass fiber as raw material.Produce with standardized mould. FRP products are unfading with features of smooth surface, color uniformity and anti-aging.
Motor: Use special motor of fully closing cooling tower, Protection level is IP54,sealed well.lt is Suitable for running in hot and humid environment, with Low running noise and long lifetime.
Fan: Wide blade, forward type. space warps, slow speed, axis flow are the features of Fan. slow speedjarge air flowjow running noise, good dynamic balance are the advantages. Adjustable beam angle for Fan, that could meet the different requirements for air flow, noise aspect, etc.
Speed reducer: Reducer casing use imported bearing and trianqle belt,which make the cooling tower speed reducer running stability, low noise and long life.
Infill: it is made of high quality PVC plain film heated processed with hot water and die-casting.Unique oblique wave design.make the air flow and water flow on the filing evenly distributed,significantly improve heat exchange performance.Tne infill is anti-UV,anti-fiaming,cold resistance,chemical resistance.
Sprinkler head: Produced by superior quality alluminum alloy and high quality engineering plastic,insiae imported bearing.easy install, well compactness, running steadily.long life.
Water storage basin: Design for high water content and high water level,avoid no water while opening machine,guarantee equipment good running.
1. For the fan diameter less than 2.4m,we use the design of patent and innovate” low speed high efficiency and special motor for cooling tower” .No reducer structure, multiple low speed fan link directly, lower noise, energy consumption and failure rate.No need adjust and change triangle belt regularly, that means low maintenance cost, energy conservation and environment protection.
2. The casing is made of Fiberglass reinforced polyester(FRP), chemical resistence. AII steel component are galvanized and meet the standard of BSENISO 1461:1999,thus this series has long operation life and are more durable.
3. Modern CAD/CAM factory produce standardized parts, Could assemble the modules of tower both in factory or construction site,elegant appearance, strong frame, anti-seisemic capacity, the intensity of wind pressure exceeds ISOkgf/m1 2.
4. Three in one ultra slim PVC cooling fin makes the thermal performance of tower excellent, All series products have been tested by authority, cooling efficient exceed 100%, super material. Hydrophilia, fire resistance, low wind resistance, high heat dissipation capacity.
5. It has better low noise performance than counter current cooling tower. The way of air inlet is opposite sides, fill is connect to basin, avoid the sound of dripping water like counter current cooling tower, and the noise was greatly reduce.
Fan motor: Use special axial flow fan for cooling tower, the material is aluminum alloy blade, high air flow, low energy, low noise, long life, Streamlined high strength air duct guarantee the inlet and outlet evenly flow, minimize the energy consumption of fan, IP5S, insulation grade is F.
Heat transferring coil: The heat transferring coil is the main part of cooling tower, is made of copper pipe or high quality steel pipe; Cooling medium through internal, Spray water outside to meet cooling requirement.
Steel pipe(G type) or Stainless steel(S type),Three time 2.5MPa high pressure test for classification and integration, to make sure the quality of welded junction is up to standard. AII of pipe were treated with hot dip galvanizing through the high temperature molten bath, ensure pipe’ s good performance.
Copper pipe(T type) use deoxidized T2 high quality copper pipe, The connection between the copper pipe and the elbow is welded by silver electrode, few solder point and high quality, the design pressure is 1.2MPa.
Casing: The casing use import aluminum zinc plate which is the one of best corrosion resistance for galvanized plate, working life is 3-6 times that of ordinary galvanized plate. Strong thermal resistance, elegant appearance.
Spray pump: High quality mechanical shaft seal without steering restriction, leak tightness, long life, special outdoor electrical machinery, import bearing with special configuration, guarantee pump running long term, small power, large flow, low noise, etc.
Drift eliminator: Use high quality PVC material, the structure could eliminate moisture from the air through change the airflow direction, ensure the drift rate under 0.001%;save water as much as possible, and ensure no pollution around tower, prevent LDB spread.
Fill: The fill is Ultra slim,0.3mm.There are drift and blade for each piece of fill. The blade and fill are joined together, restrict the flow of water interior. Inside blade reduce the trouble of running in winter.
Spray distribution system: Through large flow target nozzle to guarantee water spray evenly and continuous on the wall of coil, Allow water, fresh air and pipe medium to exchange adequately.